Mountz PULSE TOOLS Spezifikationen PDF herunterladen (Seite 7)

Features (cont.)

Output: RS-232C port for data transfer to printer, data logger or computer.

Engineering Units: 5 different units of torque measure are available. lbf.ft., lbf.in., ozf.in., N.m., Kgf.m

(Other measurement units available as special order)

Battery Operated: NiMH batteries provide long life, without “memory”. Up to 8 hours of

operation per charge. Low battery indicator turns on when battery is low. Automatically shuts down

when battery is critically low.

Memory: Stores up to 1000 torque and/or angle values. Simply press the Enter Key to store data in

memory.

Up To 15 Transducers: Program & calibrate transducers for a variety of applications.

High Impact Plastic Housing: Provides portable belt or bench mounting.

Set (Go/No Go) Tolerance: Easily set user high and low limits for Torque and Angle with green and red

Go/No Go LED’s and an audible buzzer.

Auto Reset: Automatically resets the display when a new torque cycle is sensed (Peak & First Peak

mode). Resets in 3 seconds (Power Tool Mode).

Manual Display Reset: Data is held on the display until: 1. The Enter key is pressed clearing the

display and storing the data in memory or 2. The Scroll Right key is pressed clearing the display without

storing the data in memory.

Calibration:

Fast Calibration allows the user to quickly enter and store the full scale mv/v and range

value of each transducer. True Calibration allows the user to apply torque with dead weights and capture

and store 3 calibration points in each direction.

Both calibration procedures are quick and user friendly.

Filters: Three software selectable filters (3600Hz, 1500Hz, 500Hz) allow the user to filter out unwanted

“noise”, minimizing non-torque spikes that can occur when testing pulse or power tools.

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Keine Kommentare

Mountz PULSE TOOLS Spezifikationen Seite 7