Mountz PULSE TOOLS Spezifikationen

TorqueMate® PlusOperation ManualVersion 1.2Mountz Incorporated 1080 N. 11th Street San Jose, CA 95112 Customer Service: 800-456-1828Fax: 408-292-2733

Operation (cont.)PAUSE (PAUS) MODE The TorqueMate® Plus automatically conserves battery power after 5 minutes without use. The display will show “PAU

Operation (cont.)11MODE OF OPERATIONTo change the mode of operation: 1. Press the Mode key. 2. Press the Scroll Up key until the mode arrow points to

Operation (cont.)SETTING GO AND NO/GO TOLERANCE (High/Low) LIMITSIn the Peak, Power Tool or First Peak mode: 1. Press the Tolerance key (the arrow ico

13iNote: Pressing The Wrong KeyIf at any time you press the wrong key, and you do not want tomake changes to the function you incorrectly selected sim

Set-Up ModeEnter the Set-Up mode by pressing the Tolerance and Mode key simultaneously (the Set-Up iconwill turn on). Scroll through the various Set-

Set-Up Mode (cont.)4. MANUAL CLEAR/AUTO CLEAR (Selects The Reset (Clear) Mode For The Display)a. Press Enter to select this option. b. Press the Scrol

Set-Up Mode (cont.)6. c-XX (“c” stands for Code Number)(Selects The Attached Transducer Number)The transducer number, full scale range and the units i

Set-Up Mode (Fast Cal)Quickly Entering Calibration Data For A Transducer (Fast Cal)To quickly enter calibration data for a transducer you must know th

TransducersThe TorqueMate® Plus can be used with 1 to 4 mv/v transducers. Simply assign a code number to thetransducer (1-15) and calibrate it with d

The TorqueMate® Plus and transducers are instruments that should be handled with care. Never over-load transducers above full capacity. Avoid using

Table of ContentsIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Parts Check Lis

Transducer Calibration• Always calibrate the TorqueMate® Plus with the unit plugged into the AC power adapter and makesure the batteries are fully cha

Transducer Calibration (cont.)The display will now show the mv/v signal of the transducer at full range. The default is 2.000 and themV/V range can b

Transducer Calibration (cont.)Press the Enter key to display the readings for “- P1”. The display will now show what the TorqueMate®Plus “thinks” is

Charging the BatteriesAlways leave the TorqueMate® Plus turned on when charging the batteries. This allows the micro-processor to monitor the charging

Application NotesIMPULSE AND POWER TOOL TESTINGImpulse tools have become prevalent throughout industry. The advantages of ergonomics and function-ali

Application Notes (cont.)You can test pulse and power tools in different ways: 1. Preferred Method (and quickest): Use the TorqueMate® Plus in Power T

Application Notes (cont.)CALIBRATING TORQUE WRENCHESTo calibrate torque wrenches, use the TorqueMate® Plus with a bench mounted transducer or mount aT

FiltersThe process of converting pulse type dynamic mechanical torque to an electronic signal using a trans-ducer may result in unwanted inputs (noise

Accessories28The versatile TorqueMate® Plus can adapt to an assortment of transducers for testing and calibrating differ-ent applications.BMXReaction

Accessories (cont.)Battery Pack NiMH 8.4 V 1.1Ah Part Number: 771170Battery Charger Input: 115 VAC60 HZ Output:12 VDC 300 mAPart Number: 771044Adapter

Table of Contents (cont.)Charging The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Application Notes

SpecificationsInput Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 to 4 mV/V Full Scale and 5 VDC Full Scale for Br

IntroductionThe TorqueMate® Plus can be used for many torque applications in virtually any Engineering depart-ment or environment. Here are a few comm

5Parts Check List Check to make sure that you have all of the following accessories. Retain the packing materials in caseyou need to send the unit in

Features6“Units” change keyFor “Set-Up” press “Tolerance”and “Mode” keys simultaneouslyFive different engineeringunits of torque measure Small window

Features (cont.)Output: RS-232C port for data transfer to printer, data logger or computer. Engineering Units: 5 different units of torque measure ar

Before You BeginTransducer NumberYou must have a calibrated transducer with a transducer number assigned to it. Always make sure theTorqueMate® Plus

OperationThe TorqueMate® Plus is an accurate, user friendly torque display that allows a user to quickly changefunctions and features without getting